Produced using Marine Ply to the outside and bottom faces as this offers a significantly more protection and improved lifespan
if you require a different size or your kerb is to fit another manufacturers skylight, please contact us
Delivery charges are applied at checkout and are based on a UK mainland delivery.
If you require delivery to outside this area, please contact our office for a quotation
Sizes shown relate to the overall size of the corresponding NuDawn flat, pyramid and lantern skylights
All NuDawn kerbs are produced using Marine Ply to the outside and bottom faces as this offers a significantly more protection and improved lifespan. These insulated kerbs are produced with a 75mm width on all four sides and use steel internal corner brackets to provide support to the structure.
All outside fixings are supplied in stainless steel.
NuDawn rooflight kerbs are supplied with 2 fixing brackets to each side (up to 1500mm) at 150mm from the corner. For kerbs which have a side longer than 1500mm there will also be an additional bracket at the centre point.
NuDawn flat rooflight kerbs will be manufactured to provide a 5 degree pitch. The front edge of the kerb will be 150mm high (to comply with Building Regs) and the back edge height will vary depending on the size of the rooflight.
As a guide, the top edge on a 1000mm x 1000mm kerb will be 238mm. This height increases by approximately 88mm for each metre increase from top to bottom.